(A), the guide gap between the grooved bush and inappropriate, leading to abnormal wear, or the gap at the embedded foreign matter, cause abnormal wear or scratches.
(Two), the guide groove material flow and concrete batching plant is inconsistent, there is a big gap, accelerated wear of the plastic surface.
(Three), roll damage, resulting in abnormal wear or scratch tape.
(Four), illegal operations, maintenance welding slag burns, scratches, and clean.
(5) and slide the tape will cause abnormal wear of the tape.
In the course of the belt, the most common problem is: Foreign scratches, local foreign body damage,Asphalt Mixing Plant, and perforations.
Usually because the foreign body causing local damage belts, according to the traditional method completely dismantled after repair and replacement of heating vulcanized or scrapped.
High-molecular rubber repair material, which has excellent adhesion, excellent abrasion resistance and excellent tensile properties. Using polymer rubber repair materials, free removal, free hot vulcanized rubber belt scratches on-site maintenance, repairs, low cost, short time, to avoid scrap replacement and downtime caused significant losses and fix the new belt life can be achieved.
Repair coating thickness control, rapid prototyping, cast a very short time. The cured coating has a relatively high cohesive strength, tensile strength, peel strength and good hardness, toughness, elongation. Maintenance of the construction process can be greatly simplified, self-leveling is good, bright appearance. Whether a quick repair damaged rubber conveyor belts, rubber products, but also in the product surface pre-coated with a protective layer, and prolong life.
没有评论:
发表评论