JZ type bipyramid reversal discharging concrete mixer with vintage drum drum mixer phase
Ratio, due to its mixing tube, the structure, layout and mixer blades are steel cement silo
Had changed dramatically, so the stirring power calculation can not continue to follow the drum cartridge
Calculation of the mixer. This paper from the characteristics of JZ type mixer,
From motion analysis and stress analysis to proceed, according to the concrete rheological equation,
This type mixer mixing power Concrete block machine model, and verified by an example. 1
Mixing process in motion analysis of concrete cone near the end of the feed tube
Inner wall of the symmetrical arrangement of a pair of lower blades and a pair of high blades. These two sets of leaves
Tablets and cylinder axis points
Do not become Α,-Α angle welded to the cylinder on. While stirring them with a cylinder
Starting rotation. In the mixing of concrete, the low part of the blade of the concrete mix
A higher position to the cylinder material. Then under its own weight, this part of the mixed
Aggregate material falling down, some of which fell in the lower position is high
Blade. Some of these mixing compound in the cylinder body splash, while others follow
High blade axis direction toward the cylinder near the end of the discharge cone movement.
没有评论:
发表评论