people start to vote scraper conveyor during operation

People start to vote scraper conveyor during operation should be careful to check the tightness of the scraper chain, because the chute between
Connection due to operation and reduced spacing. The chain is too loose will appear card chain, concrete mixing machine and chain off road things Therefore. Examination method is inverted conveyors, count the number of slack chain link, if two or more completely slack chain link When you need to re-tension chain.
to maintain a straight face. If the face is not straight, the tension of two chains will vary, will cause wear of the chain Uneven or the bottom chain off road, stuck or broken links. conveyor bend to fit, not a "chicane", should be made not less than eight curved portion chute, push Move around to the attention of hydraulic jacks complement each other and avoid sharp bends. Otherwise it will cause the wrong chute mouth, Concrete block machine ff into an accident, paying particular attention to stopping the conveyor can not be over. Conveyor shop was to be flat. The chute of the restriction, it is only in the vertical direction to adapt to the 3'-5 'changes Therefore, if any local bump should face floor flat. Laying flat and conveyor scraper chain in favor of transport Turn, can reduce the wear of the chute and the power consumption is reduced.